XYCOM XVME-560

 Product Positioning: A VMEbus 32-channel analog input board, suitable for systems requiring large-scale analog acquisition such as industrial automation, process control, and experimental testing.

1. Key Technical Specifications

Specification	Description
Number of Channels	32 channels (single-ended) or 64 channels (single-ended) / 32 channels (differential)
Resolution	12-bit (14-bit, 16-bit optional)
Sampling Rate	Up to 50 kHz (20 kHz optional)
Input Range	±5 V (default), configurable to ±10 V, ±2.5 V, 0-10 V, 0-5 V, etc. via jumpers
Gain	Programmable 1, 2, 4, 8
Converter	12-bit A/D, supporting DMA transmission
Digital I/O	Equipped with a small number of digital inputs/outputs for status indication
Interrupt	Supports any VMEbus interrupt level (11-17)
Power Supply	Standard VMEbus power supply (+5 V, +12 V)
Package	Standard VME-64 card (no enclosure)
Operating Temperature	–40 °C ~ +85 °C (industrial grade)

---

2. Product Features

• High Integration: The analog front-end, A/D conversion, gain/offset adjustment, DMA control, and digital I/O are all implemented on the same board, reducing wiring and system latency.
• Modular Design: Compliant with the VME-64 standard, it can be directly inserted into any VME-bus backplane, facilitating system expansion and maintenance.
• Flexible Input Configuration: The voltage range and gain can be quickly switched via jumpers or software to meet the needs of different sensors.
• High-Speed Sampling: With a maximum sampling rate of 50 kHz, it is suitable for high-speed signal monitoring.
• Reliable Industrial-Grade Performance: Features a wide operating temperature range, anti-interference design, and compliance with VME-bus electrical specifications.

---

3. Structure and Composition

• Analog Front-End: Includes input buffers, programmable gain amplifiers (PGA), and offset adjustment circuits.
• A/D Converter: 12-bit (or optional higher resolution) sample-and-hold circuit.
• Digital Logic: Consists of a DMA controller, register mapping, and VME interrupt control.
• Jumper Area: Used to select the voltage range, gain, and input mode (single-ended/differential).
• Power Management: Provides voltage regulation, filtering, and overcurrent/overvoltage protection.
• Connectors: Standard VME-64 slot and analog signal terminal block (screw terminals or pins).

---

4. Typical Application Fields

Industry	Application Scenario
Process Control	Analog acquisition of sensors for temperature, pressure, flow, liquid level, etc.
Industrial Automation	Front-end acquisition module for PLC and DCS systems
Experimental Testing	Multi-channel signal acquisition for laboratory instruments
Energy Management	Data acquisition from monitoring points in power plants and distribution networks
Aerospace	Multi-channel analog signal input for ground test platforms
Automotive Manufacturing	Data acquisition and monitoring of production line sensors

---

5. Installation and Maintenance Points

Installation

1. Insert the card into a backplane slot compliant with the VME-64 standard, ensuring the 卡扣 (clips) on the back of the card are securely fastened.
2. Check that the power supply meets the specifications (+5 V, +12 V) and confirm the normal power distribution of the backplane.
3. Set the corresponding input range and gain via jumpers or software according to the on-site sensor voltage range.

Wiring

1. Use screw terminals or pin terminals to connect sensor signals, paying attention to the polarity (for single-ended) or positive-negative pairs (for differential).
2. For differential inputs, ensure the signal lines are symmetrical and well-shielded to reduce noise.

Debugging

1. After power-on, check whether the VME-bus interrupt vector is correctly mapped.
2. Read the registers through the host computer software to verify that the sampling value of each channel is within the expected range.

Daily Maintenance

1. Regularly check the tightness of the terminal block to prevent signal distortion caused by loosening.
2. Remove dust from the surface of the card and keep the heat sink well-ventilated.
3. In case of abnormal interrupts or sampling errors, first check the power supply, jumper configuration, and integrity of the signal lines, then consider replacing the A/D chip or the entire card.

 ------------------------------------------

Many products have not been listed yet. Please contact us for more products

📧 sales5@xrjdcs.com |  📞 +86 18250705533（WhatsApp）丨Sales Manager： Jinny  

Main brand

ABB 丨 GE 丨Allen Bradley  丨  Honeywell 丨   Emerson  丨  Bently Nevada   丨 Westinghouse  

Triconex  丨Foxboro 丨   ICS Triplex  丨  Hima  丨  Schneider 丨  Yokogawa  丨 Woodward  & more

We Are Your Trusted Automation Solutions Expert

We are your trusted experts in automation solutions. With years of in-depth experience in the automation field, we provide customers with a full range of products and services covering PLC, DCS, frequency converters and more. Whether it is complex process control in the petrochemical industry or motor energy conservation in the power sector, we can tailor the optimal solution for you. Our products are renowned for stable performance and high reliability, and have passed strict quality certifications.

---

Choosing Us Brings You the Following Advantages

1. High quality
2. Timely delivery
3. We supply a large number of branded parts.
4. We have experienced staff and extensive testing facilities.
5. Sufficient inventory
6. We only provide original and brand-new products, ensuring 100% optimal quality!