PROSOFT MVI56E-MCMR

1. Overview

The MVI56E-MCMR is part of ProSoft Technology’s MVI56E series, designed as an enhanced communication interface module for the ControlLogix platform. It plugs directly into a 1756 chassis, replacing traditional I/O modules, and provides flexible Modbus master/slave communication capabilities.

2. Key Parameters & Technical Specifications

Interface Types:

Dual RS‑232 serial ports (supporting RS232/RS485/RS422) and one RJ45 Ethernet port.

Protocol Support:

Modbus RTU/ASCII, plus compatibility with Modbus TCP/IP, EtherNet/IP, DF1, ASCII, DH‑485, and other major industrial communication protocols.

Communication Speed:

Baud rates configurable from 110 bps to 115.2 kbps, with support for high‑speed transfers up to 921600 bps.

Power Requirements:

5V or 24V DC input (depending on model), ultra‑low power consumption (approximately 2W), and compatible with 800 mA backplane power.

Operating Environment:

Industrial‑grade wide temperature range from -40°C to 85°C.

3. Product Features

Enhanced Communication Performance

Utilizes Reduced Data Block (RDB) technology to minimize backplane bandwidth usage, enabling more efficient data transfer—especially suitable for ControlNet network scheduling.

High Flexibility

Two serial ports are independently configurable as master or slave, and can operate simultaneously on different Modbus networks.

Easy Integration

Configured via ProSoft Configuration Builder (PCB) software, supporting fast setup and remote diagnostics from a PC.

Industrial‑Grade Reliability

Robust metal housing designed to withstand harsh industrial environments.

4. Structure & Components

Physical Structure:

Single‑slot module, typically mounted via DIN rail, and plugs directly into the 1756 chassis backplane

Internal Components:

Includes dual serial communication chipsets, an Ethernet controller, an embedded microprocessor, and non‑volatile memory for storing configuration parameters.

5. Application Areas

Industrial Automation

Connects field instruments, sensors, and actuators such as valves, pumps, and variable frequency drives (VFDs).

Process Control

Ideal for data acquisition and monitoring in oil, gas, chemical, and power industries.

Remote I/O

Extends PLC I/O range over Ethernet or serial buses, enabling seamless remote I/O integration.

6. Installation & Maintenance

Installation Requirements:

Requires an Allen‑Bradley ControlLogix processor, an available slot, and sufficient backplane power (typically 5V/800mA). Verify chassis model and power specifications before installation.

Configuration Steps:

1. Insert the module into the chassis backplane.
2. Use ProSoft Configuration Builder (PCB) to set parameters such as port mode (master/slave), baud rate, and address.
3. Configure the module’s input/output assembly instances in RSLogix 5000 or Studio 5000.

Maintenance Recommendations:

Regularly inspect communication lines (complying with RS‑485/RS‑422 standards) and ensure configuration parameters match field devices. Use PCB software for remote diagnostics and troubleshooting.

 ------------------------------------------

Many products have not been listed yet. Please contact us for more products

📧 sales5@xrjdcs.com |  📞 +86 18250705533（WhatsApp）丨Sales Manager： Jinny  

Main brand

ABB 丨 GE 丨Allen Bradley  丨  Honeywell 丨   Emerson  丨  Bently Nevada   丨 Westinghouse  

Triconex  丨Foxboro 丨   ICS Triplex  丨  Hima  丨  Schneider 丨  Yokogawa  丨 Woodward  & more