Bently
- ABB
- GE
- NI
- EPRO
- METSO
- weida
- STS
- VMIC
- Hima
- KEBA
- B&R
- FANUC
- YASKAWA
- B&R
- KOLLMORGEN
- Other
- RELIANCE ELECTRIC
- Westinghouse
- ICS TRIPLEX
- Schneider
- MOORE
- YOKOGAWA
- ACQUISITIONLOGIC
- OKUMA
- SELECTRON
- SYNRAD
- PROSOFT
- Motorola
- Honeywell
- Bently
- Allen-Bradley
- Rockwell Ics Triplex
- Woodward
- Other Parts
- Triconex
- Foxboro
- Emerson
0102030405
Bently Nevada 3500-61rtd-TC I/O Module
Bently Nevada 3500-61
1. Overview
Bently Nevada 3500-61 is an I/O module specifically designed to process RTD (Resistance Temperature Detector) and TC (Thermocouple) signals. As a key component of the 3500 series monitoring system, it is responsible for converting temperature signals from the field into digital signals for real-time monitoring and analysis by the upper computer.
Bently Nevada 3500-61 is an I/O module specifically designed to process RTD (Resistance Temperature Detector) and TC (Thermocouple) signals. As a key component of the 3500 series monitoring system, it is responsible for converting temperature signals from the field into digital signals for real-time monitoring and analysis by the upper computer.
2. Parameters
Signal Input:
- RTD Channels: 6 channels, supporting 2-wire, 3-wire, and 4-wire configurations, with a measurement range typically from -200°C to +650°C.
- TC Channels: 6 channels, supporting J, K, E, T, R, S, B, and N type thermocouples, with a measurement range typically from -200°C to +1800°C.
- Resolution: 16-bit A/D converter (0.0015% FS).
- Communication Interface: RS485/RS422 or 100Base-TX, Ethernet transmission (depending on system configuration).
- Supply Voltage: 24 V DC (powered by the 3500 system rack).
- Environmental Adaptability: Operating temperature range from -40°C to +70°C, with protection level complying with industrial standards.
- Electromagnetic Compatibility: Complies with IEC/EN 61000 standards, with electromagnetic interference resistance.
- RTD Channels: 6 channels, supporting 2-wire, 3-wire, and 4-wire configurations, with a measurement range typically from -200°C to +650°C.
- TC Channels: 6 channels, supporting J, K, E, T, R, S, B, and N type thermocouples, with a measurement range typically from -200°C to +1800°C.
- Resolution: 16-bit A/D converter (0.0015% FS).
- Communication Interface: RS485/RS422 or 100Base-TX, Ethernet transmission (depending on system configuration).
- Supply Voltage: 24 V DC (powered by the 3500 system rack).
- Environmental Adaptability: Operating temperature range from -40°C to +70°C, with protection level complying with industrial standards.
- Electromagnetic Compatibility: Complies with IEC/EN 61000 standards, with electromagnetic interference resistance.
3. Product Features
- High-Precision Temperature Monitoring: Adopts a high-precision voltage divider circuit to ensure accurate collection of RTD and TC signals.
- Flexible Alarm Function: Supports programming of temperature thresholds, enabling setting of high/low temperature alarms, warnings, and shutdown points.
- Powerful Diagnostic Function: Capable of detecting faults such as open circuits, short circuits, and signal drift, ensuring the reliability of the monitoring system.
- Modular Design: Standardized 3500 rack structure, supporting quick plug-in and expansion.
- Compliance with Industry Standards: Meets API 670 vibration monitoring and protection standards.
- High-Precision Temperature Monitoring: Adopts a high-precision voltage divider circuit to ensure accurate collection of RTD and TC signals.
- Flexible Alarm Function: Supports programming of temperature thresholds, enabling setting of high/low temperature alarms, warnings, and shutdown points.
- Powerful Diagnostic Function: Capable of detecting faults such as open circuits, short circuits, and signal drift, ensuring the reliability of the monitoring system.
- Modular Design: Standardized 3500 rack structure, supporting quick plug-in and expansion.
- Compliance with Industry Standards: Meets API 670 vibration monitoring and protection standards.
4. Structure and Composition
- Module Body: Metal housing providing EMI shielding, installed in the 3500 rack.
- Input Terminal Block: Shielded input terminal block, divided into RTD and TC types, with convenient wiring.
- Internal PCB: Integrates analog front-end, A/D converter, microprocessor, and communication interface chip.
- Indicator Lights: Status indicator lights for displaying module power supply status and fault status.
- Module Body: Metal housing providing EMI shielding, installed in the 3500 rack.
- Input Terminal Block: Shielded input terminal block, divided into RTD and TC types, with convenient wiring.
- Internal PCB: Integrates analog front-end, A/D converter, microprocessor, and communication interface chip.
- Indicator Lights: Status indicator lights for displaying module power supply status and fault status.
5. Application Fields
- Oil and Gas: Monitoring bearing temperature and oil temperature of key equipment such as pumps, compressors, and heat exchangers.
- Power Generation Industry: Monitoring bearing and oil temperature of steam turbines and generator sets to prevent equipment failure caused by overheating.
- Chemical and Metallurgical Industry: Monitoring the temperature of reactors, condensers, and other high-temperature equipment.
- Transportation: Monitoring the temperature of engines, gearboxes, and axles.
- Water Treatment: Monitoring temperature changes of pump stations and filter presses.
- Oil and Gas: Monitoring bearing temperature and oil temperature of key equipment such as pumps, compressors, and heat exchangers.
- Power Generation Industry: Monitoring bearing and oil temperature of steam turbines and generator sets to prevent equipment failure caused by overheating.
- Chemical and Metallurgical Industry: Monitoring the temperature of reactors, condensers, and other high-temperature equipment.
- Transportation: Monitoring the temperature of engines, gearboxes, and axles.
- Water Treatment: Monitoring temperature changes of pump stations and filter presses.
6. Installation and Maintenance
Installation Guidelines:
- Rack Installation: Slide the module into the standard 19-inch slot of the 3500 series rack, ensuring the rack power is disconnected.
- Wiring: According to the RTD or TC type, correctly connect the sensor to the corresponding input terminal block, ensuring correct polarity (for TC) or lead sequence (for RTD).
- Rack Installation: Slide the module into the standard 19-inch slot of the 3500 series rack, ensuring the rack power is disconnected.
- Wiring: According to the RTD or TC type, correctly connect the sensor to the corresponding input terminal block, ensuring correct polarity (for TC) or lead sequence (for RTD).
Maintenance Recommendations:
- Regular Calibration: It is recommended to perform on-site calibration of RTD/TC sensors and modules every 1-2 years to ensure measurement accuracy.
- Fault Diagnosis: Use Bently Nevada upper computer software to monitor the self-test status and alarm logs of the module, and promptly handle open circuits, short circuits, or signal drift issues.
- Cleaning and Protection: Keep the module housing clean to avoid poor heat dissipation caused by dust accumulation, and ensure the ambient temperature and humidity are within the rated range.
- Regular Calibration: It is recommended to perform on-site calibration of RTD/TC sensors and modules every 1-2 years to ensure measurement accuracy.
- Fault Diagnosis: Use Bently Nevada upper computer software to monitor the self-test status and alarm logs of the module, and promptly handle open circuits, short circuits, or signal drift issues.
- Cleaning and Protection: Keep the module housing clean to avoid poor heat dissipation caused by dust accumulation, and ensure the ambient temperature and humidity are within the rated range.
------------------------------------------
------------------------------------------
Many products have not been listed yet. Please contact us for more products
📧 sales5@xrjdcs.com | 📞 +86 18250705533（WhatsApp）丨Sales Manager： Jinny
Main brand
ABB 丨 GE 丨Allen Bradley 丨 Honeywell 丨 Emerson 丨 Bently Nevada 丨 Westinghouse
Triconex 丨Foxboro 丨 ICS Triplex 丨 Hima 丨 Schneider 丨 Yokogawa 丨 Woodward & more
Company Profile
Core Business Focus
As a specialized provider in the industrial automation sector, we focus on the distribution and supply of spare parts for large-scale imported automation systems. Our portfolio covers cutting-edge systems including Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), Redundant & Fault-Tolerant Control Systems, and Industrial Robot Systems. We boast an extensive brand coverage, partnering with globally renowned names such as ABB, Foxboro, Triconex, Bently Nevada, Ovation, Motorola, Xycom, Allen-Bradley (A-B), Schneider Electric, GE Fanuc, Yaskawa, and Woodward, delivering comprehensive solutions for system maintenance, upgrades, and component replacement.
As a specialized provider in the industrial automation sector, we focus on the distribution and supply of spare parts for large-scale imported automation systems. Our portfolio covers cutting-edge systems including Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), Redundant & Fault-Tolerant Control Systems, and Industrial Robot Systems. We boast an extensive brand coverage, partnering with globally renowned names such as ABB, Foxboro, Triconex, Bently Nevada, Ovation, Motorola, Xycom, Allen-Bradley (A-B), Schneider Electric, GE Fanuc, Yaskawa, and Woodward, delivering comprehensive solutions for system maintenance, upgrades, and component replacement.
Technical Expertise & Reliability
With years of industry accumulation, we have built a robust technical team and a comprehensive knowledge base centered on industrial automation components. Our stringent quality control protocols guarantee the authenticity, performance, and longevity of every product we offer. We adhere to international manufacturing and quality standards, ensuring that each spare part meets the precise operational requirements of diverse industrial environments, from power plants to petrochemical facilities.
With years of industry accumulation, we have built a robust technical team and a comprehensive knowledge base centered on industrial automation components. Our stringent quality control protocols guarantee the authenticity, performance, and longevity of every product we offer. We adhere to international manufacturing and quality standards, ensuring that each spare part meets the precise operational requirements of diverse industrial environments, from power plants to petrochemical facilities.
Comprehensive Product Portfolio
Our product range is designed to cater to the diverse needs of the industrial market. Whether our clients require standard components for routine maintenance or specialized parts for custom system integrations, we provide a one-stop solution. Our extensive inventory and strategic sourcing enable us to offer competitive pricing without compromising on quality, making us a reliable partner for both large-scale industrial projects and small-scale system upgrades.
Our product range is designed to cater to the diverse needs of the industrial market. Whether our clients require standard components for routine maintenance or specialized parts for custom system integrations, we provide a one-stop solution. Our extensive inventory and strategic sourcing enable us to offer competitive pricing without compromising on quality, making us a reliable partner for both large-scale industrial projects and small-scale system upgrades.
Industry Standing & Trust
Built on a foundation of integrity and professionalism, we have earned a reputation for excellence in the global industrial automation market. Our commitment to ethical business practices, product reliability, and exceptional customer service has fostered long-term trust and loyalty among our clients, establishing us as a preferred supplier for industrial automation spare parts and integration services.
Built on a foundation of integrity and professionalism, we have earned a reputation for excellence in the global industrial automation market. Our commitment to ethical business practices, product reliability, and exceptional customer service has fostered long-term trust and loyalty among our clients, establishing us as a preferred supplier for industrial automation spare parts and integration services.
description2